ATTENTION PLS: Because the plant is forbidden to export, so all no plants.

Magic Air bonsai

1, Components
a Base
b, Power cord

2, Good to know
a, By setting up the plant, hold the plant vertically firmly. Leave it when the plant finds the right position. Make sure it will not drop down towards the base.
b, Don’t open the base which may cause damage.
c, Keep this product 20cm away from other electronic or metal items to avoid interfering.
d, Keep it out of touch of the child below 12 ages.

3, Operation
1. Connect the power, put the base on a flat surface.
2. Two hands hold the plant aiming at the center of the base. Slowly put the plant down towards the base.
3. When feel magnetic force pull or push the plant adjust the position properly to the center of the base.
4. When feel the force disappears, keep the plant stable for 3-5 seconds. Then slowly lose hands until the plant stays by itself.
5. When failed just repeat the above steps with patience.
6. If failed many times turn off the power let the base cool down. Then try it again.
7. Can ask other people for help to set up the plant if you really feel it difficult to do.
8. Remember always take away the plant before the turn off the power.
9. When the plant container is stuck with the base hold the bottom of the container and pull it away by moving it in a horizontal direction.

4, Product specification
1. Floating height: 1-3cm, determined by plant watering.
2. Power input: ADC 12V
1.Connect the power, put the base on a flat surface
2. Two hands hold the plant aiming at the center of the base. Slowly put the plant down towards the base
3.When feel magnetic force pull or push the plant to adjust the position properly to the center of the base
4. When feel the force disappears, keep the plant stable for 3-5 seconds. Then slowly loose hands until the plant stays by itself
5. Remember always take away the plant before the turn off the power